![Parker MFP-391 Two-Position Button-Style Directional Control Valve Manual Operated, Button Style - Two Position](http://ecx.images-amazon.com/images/I/31vSxk9zwcL.jpg)
Parker MFP-391 Two-Position Button-Style Directional Control Valve Manual Operated, Button Style - Two Position
Product Description
Button Style - Two Position
![disclaimer](http://i1192.photobucket.com/albums/aa325/calculuslover097/disclaimer2.gif)
Button Style - Two Position
* Wire is ideal for extra security to existing systems * Handy dispensing spools * Galvanized finish * 14 Gauge * 1/4 mile
Made of Santoprene? in Three Colors Available in 100 or 500 Foot Rolls This CRL Self-Adhesive Weatherstrip is designed to be applied to the "stop" perimeter of a frame to prevent energy loss; reduce noise and smoke infiltration. It will not crack or craze in cold or heat. Installation is easy and requires no tools. Manufactured in accordance with ASTM E-283 for use on labeled openings up to 90 minutes.NOTE: Occasionally the release paper on the Two-Sided Tape can be difficult to peel off. When this happens the tape itself might peel away from the santoprene bulb. To overcome this problem, pinch the end of the bulb seal, rolling the bulb between your thumb and index finger. This helps break the seal on the end between the paper and tape. Carefully start to peel off the paper and check to see that the tape is not coming off at the same time.
Manufactured from High Performance Parts
Brand New
Contact us for 1 year defective warranty
10 X 3/4 Self-Tapping Screws Slotted / Hex Washer Head / Serrated / Type AB / Steel / Black Oxide
12 x 3 Square Bugle Swaneze Boardwalk™ Decking Screws T17 305 SS - 5 lbs Pack (240) - Require a #3 square drive. The type 17 tip provides fast starting and resists splitting in hardwood. Coarse threads run approximately 2/3 up the shank to draw the decking tightly to the substrate. Pre-drilling is recommended near board ends to prevent splitting.
Swedish Design Table Legs. 6" diameter by 34 1/2" high with recessed glide leveler. Available in three finishes. All made from best quality cold rolled steel, then polished and plated or painted to perfection.
Includes handy carrying strap and nylon pouch.
Cylindrical Knob lock housing. Cold rolled steel, corrosion treated for normal atmospheric conditions Key removable outside knobs for easy cylinder replacement Solid brass 6-pin cylinders No exposed mounting screws Exposed Trim: Wrought brass, bronze, or stainless steel Door Range: Knob and decorative designs: 1 3/8" - 2" (35 mm - 51 mm) standard. Exceeds 800,000 cycle ANSI Grade 1 requirements by nearly 4 times (3,000,000 cycles)
The lock pre-set to fit Left-handed door (Hinge is on your left from outside).
Description:
Adopts optical sensor, CMOS chip.
Unlock: Fingerprint, PIN or key.
Up to 99 fingerprints capacity.
Individual user deletion.
Reversible handle fit any left or right handed door.
Lock has been pre-set to fit left or right handed door, you may change it any time.
LCD for easy operation.
External Stand-by Power supply.
Fit most cylindrical locksets.
Heavy duty construction design.
Set to passage mode at any time.
Press one key to unlock when you set to passage mode.
Fingerprint won't lose if batteries are dead.
Schlage style override key is for emergency.
Highly recommended for Indoor use.
4 AA batteries, one year battery life.
Low voltage warning.
One year limited manufacturer's warranty.
Specifications:
Authentication speed <1 second.
Authentication methods: 1:N.
Response time <1 second.
FAR (False Accept Rate) < 1/100000.
FRR (False Reject Rate) < 1/100.
Angle for putting finger: Any angle.
No external wiring required.
Power Supply: 4 standard AA batteries.
Static Consumption: < 25uA.
Dynamic Consumption: 90mA-150mA.
Operating humidity 15%-95%.
Operating temperature: 14° F to 131° F.
Adjustable latch: 2 3/8" or 2 3/4" backset.
Fit a standard 2-1/8" diameter hole.
Fit door thickness from 1 3/8" to 2"
Color: Satin Chrome
Please Call 1-800-610-8708 or Email to info@scyanelectronics.com if you have any question.
Finish/Color:Polished Nickel Knob w/Pietra Pasesina Stone
Tremco Vulkem 116 One-Part, High-Performance Polyurethane Sealant One-Part Grainy Textured Finish Primerless Adhesion on Most Common Construction Surfaces Durable and Flexible Seal Features and Benefits: Tremco Vulkem 116 has demonstrated superior primerless adhesion to porous substrates for 30 years, and is the choice for sealing expansion joints in commercial construction applications. It can be used exterior or interior with adequate ventilation. Vulkem 116 is also suitable for certain water immersion applications. Tremco Vulkem 116 is also rated for 25% movement capability. Tremco Vulkem® 116 Sealant is a one-part moisture curing, gun grade polyurethane sealant. Vulkem® 116 is durable, flexible, and offers excellent performance in moving joints. No primer is required on most construction materials, and it applies with conventional caulking guns. It is an excellent general purpose sealant designed for use in precast, masonry, glazing, window frame perimeters and similar types of construction joints. Suitable for continual immersion in water with the appropriate primer. Designed for exterior and interior use. The light grainy texture has proven very popular for matching textured substrates like stucco and masonry, and for smooth metal storefront joints the light texture blends and hides tooling marks and the wavy effect that is inevitable when tooling sealants. Color: Ivory Contents of Cartridge: 10.1 fl oz (300 ml) Tremco Vulkem 116 Color Chart Joint Design: Vulkem 116 may be used in any vertical or horizontal joint designed in accordance with accepted architectural/engineering practices. Joint width should be 4 times anticipated movement, but not less than 1/4" (6.4mm). Joint Backing: Closed cell or reticulated polyethylene backer rod is recommended as joint backing to control sealant depth and to ensure intimate contact of sealant with joint walls when
Constructed of heavy-gauge steel with tough, appliance-like finish. Replaceable air/water separator prevents corrosion and bacterial growth - in compliance with FDA regulations. Tank is factory pre-charged to 40 PSI. Includes pump mounting bracket.
Pre-charged tanks are rated to compare with equivalent-size conventional (standard) tanks in terms of water draw down between pump cycles. The actual physical size of a pre-charged tank is much less and allows space savings up to 50% when comparing drawdown and size to that of a conventional tank. Economy is achieved with the smaller size of pre-charged tanks compared to similar water delivery and size of conventional tanks. This tank has a rated size of 42 gallons; the actual tank capacity is 19 gallons. U.S.A. Material: Steel, Max. Capacity (gal.): 42, Includes: Pump mounting bracket, Max. PSI: 50, Discharge Port (in.): 1, Dimensions D x H (in.): 16 x 32
ADVANCED MOTOR & DRIVE TROUBLESHOOTING KIT
The LAN Toner is designed for the network installation and maintenance professional and can be used on any wiring system including datacom, telecom, security/alarm, audio and CATV.